Does inverting the phase of one channel of a stereo signal always sound bad?

David Mellor

David Mellor is CEO and Course Director of Audio Masterclass. David has designed courses in audio education and training since 1986 and is the publisher and principal writer of Record-Producer.com.

Monday July 29, 2013
FREE EBOOK DOWNLOAD ►

I received a piece of work from an Audio Masterclass student today, where he said he had flipped the phase of one of the channels of the drum overheads, because he preferred the sound that way.

Conventional audio wisdom would say this is wrong, unless one of the microphone cables was incorrectly wired in the first place, which happens more often than you might think. (There's a reason for this that I'll save for a future article.)

Let's take the case of a stereo recording made with coincident microphone technique. In this case, the two channels of the signal are mostly in phase, with the differences in the signal coming from the differences in the left and right sides of the sound in the room.

Flip the phase (or more correctly 'invert') one channel and you'll get a stereo signal that is mostly out of phase. The left channel will be pushing your left ear drum inwards while the right channel is sucking it out. (My old physics teacher told me never to use the word 'suck' in connection with air pressure. But since everyone knows what it means, and trying not to use it takes twenty times as many words, I'll use it for convenience.)

A stereo signal that is out of phase sounds wrong because this is something that never happens in nature and our ears and brains have no way of making sense of it.

Spaced overheads

But what if the microphones are spaced rather than coincident, as they normally are for drum overheads?

Now the phase relationship between the two channels is much less precise. The sound from the ride cymbal arrives at one mic before the other, as does the sound from the crash cymbal in the reverse direction. And look how many cymbals drummers have these days.

When the phase relationships of the original sounds are confused like this, it doesn't matter so much whether you invert one channel or not. There's no reason not to try it. If you like it, then you won't be doing any harm. But you really have to be sure you like it. It could easily be something you come to regret later on. And when questioned by the mastering engineer, who at this point in the process can't do anything about it, what will your response be? Don't forget that the individual drums will be out of phase in the overheads, although once again spaced miking will cloud the issue, and the individual drums will have their own mics, which will be dominant in the mix.

In summary, phase relationships are not always a cut-and-dried issue. Sometimes there is room for experimentation and sometimes what isn't totally technically correct will actually sound better. But you had better listen very carefully.

Like, follow, and comment on this article at Facebook, Twitter, Reddit, Instagram or the social network of your choice.

Come on the Audio Masterclass Pro Home Studio MiniCourse - 60 great hints and tips to get your home recording studio MOVING

It's FREE!

Get It Now >>

How to choose the best key for your song

What is comb filtering? What does it sound like?

NEW: Audio crossfades come to Final Cut Pro X 10.4.9!

What is the difference between EQ and filters? *With Audio*

What difference will a preamp make to your recording?

Watch our video on linear phase filters and frequency response with the FabFilter Pro Q 2

Read our post on linear phase filters and frequency response with the Fabfilter Pro Q 2

Harmonic distortion with the Soundtoys Decapitator

What's the best height for studio monitors? Answer - Not too low!

What is the Red Book standard? Do I need to use it? Why?

Will floating point change the way we record?

Mixing: What is the 'Pedalboard Exception'?

The difference between mic level and line level

The problem with parallel compression that you didn't know you had. What it sounds like and how to fix it.

Compressing a snare drum to even out the level

What does parallel compression on vocals sound like?

How to automate tracks that have parallel compression

Why mono is better than stereo for recording vocals and dialogue

Clipping and compressing a drum recording to achieve an exciting sound texture

What can we learn about room acoustics from this image?

Can you hear the subtle effect of the knee control of the compressor? (With audio and video demonstrations)

What is the best studio microphone?

What is the Neve sound? (Using the Slate Digital FG-73)

What is the difference between recording, mixing and mastering?