Your go-to source for insightful music industry analysis Contact us

A very unusual tape recorder used for mastering

By · · 12 min read

A very unusual tape recorder used for mastering

  

A very unusual tape recorder used for mastering

If you look at the photo carefully, you will see that this Studer A80 analog tape recorder has several more tape guides than the norm. It’s used for mastering. But why?

By David Mellor, Course Director of Audio Masterclass

At the time of writing (June 13, 2012), this tape recorder is up for auction on Ebay. It is a Studer A80 and, as analog tape recorders go, this is one of the very best. But this isn’t a normal A80, it is the mastering version. So the question is, why is there a special mastering version, and what makes it different from a normal A80?

If you look closely at this pic, you will see that the heads are arranged differently to a normal tape recorder…

Usually, you would expect to see three heads - erase, record and play - set very close together underneath a head cover that makes everything look neat and tidy. But here there are two playback heads, separated quite widely.

So this machine can’t even record, so it isn’t even a tape recorder - it is a tape playback machine. So how does that make it suitable for mastering?

The answer is that this machine was used for mastering to vinyl. It is only ever used to play back signal to a vinyl cutting lathe. It is not capable of recording and that never was the intention of the machine.

So now the question arises why a special version of the A80 was desirable for mastering? Why wouldn’t a standard A80 do?

The answer to this is that to maximize the duration of playback of each side of a vinyl record, the turns of the groove should be spaced so that they never take up any more width than necessary. Loud signals make the groove wiggle a lot. For quiet signals the groove is much more nearly a smooth curve. Lathes were designed so that they could automatically modify the pitch of the groove according to the level of the signal. However, since a quiet section in one turn of the groove might be followed by a loud section in the next, the lathe had to be able to ‘look into the future’ to see what is coming next.

This is the purpose of the second ‘preview’ playback head on the left, which sends signal to the lathe’s control mechanism a little ahead of the signal sent to the lathe’s cutter head. The extra tape guides are there to extend the time interval between the preview head and the main playback head. The tape is looped around these heads according to the diagram attached to the top plate of the machine.

Of course you could say, “Why not use a normal tape recorder and delay the signal to the lathe’s cutter head digitally?”

Tell this to a vinyl junkie and see what happens…

Publication date: Friday June 15, 2012
Author: David Mellor, Course Director of Audio Masterclass

Tweet


Discussion on this topic…

Frank Kobina Prah, Cape Coast, Ghana

It good to have it but now the computerize world has made it difficult to come by this but it seems it okay
Wednesday June 20, 2012

Michael Fremer, Wyckoff, USA

Of course machines like that are still in use today as vinyl has made a big comeback (sounds better than any digital format in my opinion and in the opinion of many recording engineers too—like Roy Halee who recorded “Graceland” and all of the Simon and Garfunkel albums, Dylan’s “Highway 61 Revisited” etc. so he knows what great master tapes sound like)…Sterling Sound has one, as do other mastering houses that produce all analog lacquers for music recorded in the analog domain. If you listen to Ray LaMontagne albums, all of them are AAA all the way. That’s how Ethan Johns insists they be made. Digital preserves music the way formaldehyde preserves frogs: you kill it, and it lasts forever. Although not even the “forever” part is true.
Wednesday June 20, 2012

Don Norman, Kingston, Canada

Ah ha! I’m the fortunate one who has lived in both worlds. I was in RCA studios in Montreal and Toronto in the days when the tape machines were the size of a telephone booth. Oh sorry, some of you are too young to know what a telephone both is. No sliders on the very small mixing board either. I could go on and on but the point I really want to make is; how thankful I am to have lived long enough to work with today’s technology. Performing, studying and recording music keeps this old boy going.

Cheers,

Don
Wednesday June 20, 2012

Henry Diaz, Shirley, United States

I think it’s a testament to the ingenuity and persistence of audio engineering of the era. The techniques devised to squeeze the best performance and fidelity of what state-of-the-art equipment was available at the time never ceases to amaze me. Of course today many of past audio hurdles have been “solved” (debatable) by the digital revolution but after all … how did we even get here? Through generations of audio enthusiasts searching for improved methods of recording, editing, mixing, mastering & distribution. If you compare yesterdays “best” recording to today’s “best” you must admit that the bar has been raised and some extremely good audio tools are now available to nearly anyone who has the ability to use them well (and some “not-so-well). So be grateful to audio’s past efforts and the fine moments in music regardless of how they were captured. And think about this: Just what will be considered “ancient audio arts” 50 years from now?
Tuesday June 19, 2012

Wayne, Nashville Tn, USA

Ah the good old days. When recordings actually sounded good, unlike today.
Tuesday June 19, 2012

Joe, Philadelphia, Pa

Yes indeed, just another example of the insane hoop-jumping we had to do back in the “good old days” to stuff great audio into so-so vinyl grooves. ;-)
Tuesday June 19, 2012

Jack, Peterborough, Canada

It is one amazing looking part of music history. I would Concider buying it just to have in my Studio.
Tuesday June 19, 2012

Lemon, -, -

When i see this im so happy we are in the digital era.
Just a small curse from my side in the audio-recording church :)
Tuesday June 19, 2012

We welcome your addition to the discussion on the topic of this article. If you feel that the article is inaccurate in any way, please let us know by e-mail at [email protected]. We read all messages sent to this address but we cannot promise a reply.
 
You don’t need an account to post :-)

Producer Fran Ashcroft: How many tracks are enough? One of the most enduring myths in recording has been the endless quest for more and more tracks, which grew exponentially from the real need to overdub in the 60’s. Prior to 4 track, overdubs were made by compiling sounds from one machine to another - with a generation loss of sonics every time… Read more…

Is your producer trying to steal half of your royalties? You might think that the occasional suggestion your producer is giving you about your song is helping you improve it. But secretly he might want to get his hands on half your royalties… Read more…

Q: How can I make my drums and my bass guitar sound heavy? My drums and bass guitar sound loud and heavy when I play them, but they don’t sound heavy enough when I make a recording. How can I make them heavier? Read more…

Build a working turntable from CARDBOARD, courtesy of Kid Koala Kid Koala’s new CD, 12 bit Blues, comes with a cardboard turntable that you can build yourself, plus a flexidisc to play on it. Want one? You really should! Read more…

Q: How similar is live sound equipment to recording equipment? I have been recording for some time now, but I would like to get into live sound. How relevant will my existing experience with recording equipment be? Read more…

Extreme Auto-Tune effects made easier Extreme Auto-Tune effects are everywhere in pop music. But how difficult does it have to be to get the right sound? Read more…

Should your music be more organic? The food you eat is mostly factory farmed - grown in chemicals manufactured in a chemical works. But is your music ‘factory farmed’ too, and does it sound like it? Read more…

“Baby Blue” by BlackRue I purchased a Tascam 2488 digital recording machine in 2006. Besides going into a recording studio and paying to record music, my only hands on experience was multi tracking with tape… Read more…

No really, you have NOT seen anything like this before! JamHub is billed as ‘the silent rehearsal studio’. Whatever it is, there’s simply nothing else like it. Read more…

Microphones - will we always hook them up to a preamplifier? In the future, microphones won’t be like the microphones we use today. We won’t have to hook them up to a preamplifier. Whoa this is heavy… Read more…

Microphones do matter In contrast to my recent article where I said that choice of microphone often doesn’t matter, there are times where selecting the right microphone can make an enormous difference to your sound. Read more…

It’s simple - your preamp needs MORE FREQUENCIES! Having trouble with your recordings? It could be that your preamp simply doesn’t have enough frequencies! Read more…

Is analog audio equipment DEAD? As the march towards computerized digital audio equipment continues, surely analog equipment will eventually lie dead, buried, forgotten… Read more…

Who knows best what ‘sound’ will make a hit record - Record Producer or A&R manager? What makes a hit record? Sometimes it’s the song, sometimes it’s the sound. But who decides whether a certain ‘sound’ will sell? Read more…

Q: What equipment do I need to set up a home recording studio? What basic equipment should I buy to set up a home studio and as well for industry or for a business? Please I need a list for both Read more…

Would you pay $130 for a resistor? Electronic circuits are packed with resistors. Normally they cost no more than a few cents each. But this one, from a vintage vacuum tube mic, is on sale for $130 US dollars. $130 US dollars! Read more…

Our last word on the iPad! For now… Some things about Apple’s iPad are great. Some things are, er, missing. But how useful is it in the studio right now? Read more…

An unusual use for a microphone shock mount A microphone shock mount can help a performer sing better. Amazing but sometimes true! Read more…

Do your cymbals sound like trash can lids? You’ll never get a good recording of a drum set if the cymbals sound bad. But how you be sure to get a perfect cymbal sound every time? Read more…

How to keep master processing to a minimum Too much master processing can really spoil a mix. So how can you keep it to a minimum? Read more…

 

Related reading

Who we are

At Record Producer, we are dedicated to providing high-quality insights and resources for music producers and enthusiasts. Our articles cover everything from mixing techniques to industry trends.

Read our story