New R-122V Tube Ribbon Microphone from Royer Labs
Royer Labs has announced the R-122V Vacuum Tube Ribbon Microphone, the company's newest addition to the R-Series microphone line. The R-122V is a compact, monaural, bi-directional microphone, and is the first commercially produced vacuum tube ribbon microphone available...
Royer Labs has announced the R-122V Vacuum Tube Ribbon Microphone, the company's newest addition to the R-Series microphone line. The R-122V is a compact, monaural, bi-directional microphone, and is the first commercially produced vacuum tube ribbon microphone available.
A limited production vacuum tube studio ribbon microphone, the R-122V utilizes the same large-ribbon transducer assembly that is found in the R-121 and R-122 Active Ribbon microphones--providing a familiarity of sonic performance associated with the R-Series microphones. The R-122V exhibits a flat frequency response and a well-balanced soundfield, and provides an output of -29dB, which is approximately 25dB hotter than an R-121. Like its predecessors, the R-122V's ability to withstand high SPL levels makes it well suited for applications that were previously considered off limits to ribbon microphones.
The R-122V's offset-ribbon design positions the ribbon element toward the front of the microphone body. This design enables high SPL handling on the front (logo) side of the instrument, with the option of a slightly brighter response when recording via the microphone's back side (3 feet and closer; phase reversed in this position).
The R-122V's active electronics utilize a NOS (new old stock) U.S. built military 6AU6 vacuum tube and Royer's proprietary toroidal ribbon matching transformer (patent pending). A Jensen 8:1 ratio output transformer provides an electrically isolated, fully-balanced output signal. The R-122V can drive virtually any preamplifier and long cable runs (from power supply to preamp) with ease. The active circuitry provides optimum impedance to the ribbon element at all times, preventing over-damping of the ribbon element and assuring consistent microphone performance. The R-122V receives an extensive burning in procedure to assure proper settling of the vacuum tube.
The R-122V employs a pure (99.99%), low mass, 2.5-micron thick aluminum ribbon. The R122V's unique, patented offset-ribbon transducer assembly incorporates rare earth Neodymium magnets in a specially designed flux frame, which forms a powerful magnetic field while reducing unwanted stray magnetic radiation. The smooth frequency response and phase linearity of the R-122V, coupled with its classic triode-connected vacuum tube circuitry, enable the R-122V to deliver a consistent acoustic performance with stunning realism according to the company. Frequency response is excellent, regardless of the angle of sound striking the ribbon, and off-axis coloration is negligible.
With an 18-carat gold finish, the new Royer Labs R-122V is a visually striking microphone. This microphone comes with a dedicated power supply and the included cable set is equipped with military grade locking type XLR connectors.
The new R-122V Vacuum Tube Ribbon Microphone carries a suggested retail price of $3,495.00. The microphone will be available in late 2005.
For more information, visit their web site at www.royerlabs.com
“It isn't about equipment and software -it's all about knowing how to use it”
Clicks occur for all kinds of reasons - imprecise editing, random noises, gremlin infestation. But when do you need to do something about them? Read more... 
Perhaps your microphone came with a shock mount. Perhaps it was an expensive accessory. But why won't a simple clip or stand adapter do the job? Read more... 
Two singers, one microphone. Could it cause an Internet sensation? Read more... 
It's a rare bass guitar recording that doesn't vary in level to some extent. In most cases, this adds nothing to the musicality of the recording and just makes the track harder to mix. Read more... 
Every home needs a listening room or home cinema with a pair of really big loudspeakers. And this pair certainly is big. And unusual too. Read more... 
Capacitor microphones used to come each with their own power supply. Then phantom power was invented so that any number of mics can be powered from the mixing console. So why are some manufacturers returning to the old ways? Read more... 
Electronic circuits are packed with resistors. Normally they cost no more than a few cents each. But this one, from a vintage vacuum tube mic, is on sale for $130 US dollars. $130 US dollars! Read more... 
It seems that a RecordProducer.com reader's mixer is out of tune. Or is he building a hot rod? Read more... 
Everyone should build a loudspeaker at least once in their life. But for this would-be loudspeaker builder, their first attempt was something of a disaster... Read more... 
It's a topic of endless debate, but really there is no way a stream of digits can beat the real vinyl experience. Read more... 
Amazingly, the answer to this question is - almost - yes! Read more... 
If you look at the photo carefully, you will see that this Studer A80 analog tape recorder has several more tape guides than the norm. It's used for mastering. But why? Read more... 
If you write your own songs, you might be able to get royalties for your live performances. Why settle for just one income stream? Read more... 
We receive a lot of recordings here at RecordProducer.com and Audio Masterclass. Some are strangely quiet. Why should this be? Can quiet ever be good? Read more... 
A RecordProducer.com reader has a song that is too long. How can he edit it so that it is shorter? Read more... 
I sent you an audio file by email, but you wrote back and said you couldn't play it. I can play it fine on my computer. Shouldn't you be able to play any audio file? Read more... 
I never thought I'd see synchronized singing and hula hooping, but I have now. And it demonstrates an interesting scientific principle that relates closely to audio. Read more... 
It's a strange world where you can buy a secondhand analog tape recorder for less than the price of some tape emulation plug-ins and devices. But which will give you the most authentic sound? Read more... 
Put four converters to the test, in a pro studio with pro testers. See which one comes out best. Or is the result a foregone conclusion? Read more... 
My audio interface has what's called an 'insert point'. What is it? What can I do with it? Read more... - M-Audio Studiophile AV 30 monitors - Could they be Auratones for the digital age?
Can an $89 pair of monitors really be an effective tool in the recording studio? Or are they only good for 'media creation? - Can a pianist's wrong note played in 1962 be fixed in 2013?
A wrong note that has resonated for more than half a century is fixed - without the aid of a time machine. - Are certain mic/preamp combinations special?
An RP reader finds that a certain combination of microphone and preamp works much better than he expected... - Why haven't you had a Hot 100 hit yet?
Anyone with a home recording studio now has the means to create a hit. So why haven't you yet? - Can guitarists be trusted with their own equipment?
What sounds good to the electric guitar player doesn't necessarily sound good to the audience. A live sound engineer explains... - What is your main concern if your interest is voice over?
So you're setting yourself up in the voice over business. What should you think about before anything else? - Can you print a vinyl record on a 3D printer?
Amazingly, the answer to this question is - almost - yes! - An interesting microphone setup for violinist Nigel Kennedy
If you're miking one of the finest violinists in the world, should you point the mic at the double bass instead? - To mic or not to mic the backline? That is an interesting question raising fascinating further possibilities
An RP reader fears losing cabinet resonances if the backline of his band is miked up through the PA. But perhaps it is innovation in live sound that has been lost over the years. - When working in a new theatre, always find out where the tielines go
Any theatre would have tielines from the stage to the sound control booth. But from one side of the booth's window to the other? - Top producer 'steals' song as part of massive publicity stunt
A major producer has 'stolen' a song from a pair of unknowns. A crime, or normal everyday life in the music business? - If AKG makes a USB microphone, does it mean that the time has come for USB mics?
AKG makes some of the best mics in the world. AKG also makes a USB mic. A great USB mic? - Would you record vocals like this?
Two singers, one microphone. Could it cause an Internet sensation? - Hum - Can you hear it, even if you can't hear it?
If a tree falls in the woods, does it make a sound (if no-one is around to hear it?) If you can't hear hum, then is there no hum? - Preparation for mastering: Don't do any mastering yourself
Are you planning on getting your tracks mastered? Then the first rule of preparation is not to master the tracks yourself. - A hum generator plug-in? We want one!
You can get a plug-in to emulate virtually any analog audio process these days. But what about hum? Where's the plug-in for that? - An inside view of the weirdest recording session ever, at the BBC!
Take a 300-year old bass line, a cello player with just seven days' experience, and some highly uncool-looking musicians... and make a recording that is really top of the pops for weird! - Would you put your head inside a piano? No? Then why place a microphone there? [with video]
![Would you put your head inside a piano? No? Then why place a microphone there? [with video]](http://www.record-producer.com/i2/julia-lezhneva.jpeg "Would you put your head inside a piano? No? Then why place a microphone there? [with video]")
Sometimes unusual microphone placements can capture an interesting sound. In this instance, the sound is completely wrong. - When is a click not a click? When should you fix a click, and when should you leave it alone?
Clicks occur for all kinds of reasons - imprecise editing, random noises, gremlin infestation. But when do you need to do something about them? - Should you make decisions as you record, or keep your options open until later?
There are so many decisions to be made during the process of recording. Should you make them one at a time as you go along, or let them pile up so that you have a mass of decisions to make in the mix?